Skip to content
+32 (0) 9 340 44 04 info@eco2box.com

TL;DR Whether single use or reuse is cheaper is decided per saleable plant, not per vessel. Count the purchase spread over the number of uses, the minutes for washing and checking, sterilising and waste, then divide by the plants that are alive and saleable after planting out. The worksheet below does that sum with your own numbers. Eco2Box publishes no cost figures: the result depends on your wages, your losses and your crop.

Single use or reuse is usually argued from the purchase line alone. A reused vessel looks cheap per cycle, a single-use vessel looks dear, and the minutes at the sink and the plants lost on the way stay out of the sum. No worked cost-per-plant example with the vessel as a line was found on the open web, so this page gives the method and leaves the numbers to you.

What does a culture vessel really cost: single use or reuse?

The real cost of a culture vessel is its cost per use, divided by the saleable plants that come out of it. Cost per use is the purchase spread over the number of uses, plus washing, sterilising and waste. Saleable plants are the plants put in, minus vessels lost to contamination, minus plants that do not survive planting out.

That definition holds for a glass jar reused for years, for a plastic vessel reused a few times and for a vessel used once. Only the numbers on each line change.

Which costs differ between single use and reuse?

Five lines differ between single use and reuse: purchase per use, washing labour, sterilising, breakage and waste. A reused vessel spreads its purchase over many cycles and adds work every cycle. A single-use vessel is paid for every cycle and adds no washing.

Line Reused vessel Single-use vessel
Purchase per use Purchase divided by the number of uses you really get Paid in full every cycle
Washing and checking Emptying, washing, drying and inspecting, every cycle None
Sterilising Autoclave every cycle: energy, water, time Supplied sterile, or sterilised once
Breakage and wear Vessels that break, crack or no longer close leave the stock Not carried to a next cycle
Waste At the end of the vessel’s life Every cycle

The worksheet: vessel cost per saleable plant

The worksheet has thirteen lines and two columns, one for the vessel you reuse and one for the single-use vessel you compare it with. Fill in both columns with your own numbers, for one vessel and one culture cycle. Line M is the answer: the total cost per saleable plant.

Line What to fill in Reused vessel Single-use vessel
A Purchase of one vessel with its lid
B Number of uses you get from one vessel 1
C Purchase per use: A divided by B
D Washing and checking per use: minutes per vessel times your labour cost per minute 0
E Sterilising per use: autoclave energy, water and time per vessel
F Waste per use
G Vessel cost per use: C + D + E + F
H All other cost per vessel per cycle: medium, transfer labour, growth room
I Plants put in one vessel
J Share of vessels that finish the cycle without contamination
K Share of plants alive and saleable after planting out
L Saleable plants per vessel: I times J times K
M Total cost per saleable plant: (G + H) divided by L

Line G divided by line L gives the vessel’s own share per saleable plant. Keep it next to line M: it shows how small or large the vessel is in the whole sum.

How do I fill in the single use or reuse worksheet?

Fill in the worksheet with measured numbers from your own lab, one culture cycle at a time. Six steps are enough.

  1. Take line A from your last invoice or quote, for the vessel with its lid.
  2. Count line B. Divide the vessel uses in a period by the vessels you bought in that period, breakage and rejects included.
  3. Time line D. Follow one batch of vessels from emptying to the clean shelf and divide the minutes by the number of vessels.
  4. Ask for line E. Your autoclave log gives the loads per week and the vessels per load.
  5. Take lines J and K from your own records, per crop, and use the same definition of saleable in both columns.
  6. Fill in line H once and copy it to both columns, unless the vessel changes the number of plants per vessel.

Why do losses weigh more than the purchase line?

Losses weigh more because lines J and K divide every cost in the vessel, not only the vessel itself. A vessel that is lost to contamination, or a plant that dies after planting out, takes its medium, its labour and its shelf space with it. A change in line K moves every cost on the sheet; a change in line A moves only line C.

One published study links survival to cost. A raspberry study by Lebedev et al. names successful acclimatisation among the key factors that reduce the cost of micropropagated plants. In that study 81% to 98% of shoots rooted in the lab survived the move to non-sterile conditions, against 43% to 76% of shoots that were not rooted, across seven cultivars. That is a comparison of rooting methods, not of vessels. It shows how far line K can move within one crop.

Whether a vessel changes lines J and K in your lab is something only a side-by-side test on your own plants can show.

Where do Eco2Box containers fit: single use or reuse?

Eco2Box containers fit both columns, depending on the version. Untreated polypropylene Eco2Box vessels and covers are autoclaved at 121 °C before first use; we recommend at most 5 uses, and the material becomes more brittle each cycle. Gamma irradiated Eco2Box articles are supplied sterile and autoclaving them is not recommended (at most 2 to 3 cycles, and the plastic turns brittle and yellowish), so in this worksheet they go in the single-use column.

For the reuse column, line B for an untreated Eco2Box container is at most 5 (our recommendation; the plastic never takes more than 10), and ECO2 nv cannot guarantee that a reused container works properly, as the Eco2Box FAQ also says. For line A, ask for a quote: prices are not shown on the site. The containers are in the product range.

When does reuse fit, and when single use?

Reuse fits when a vessel lasts many cycles and washing costs little; single use fits when washing takes many paid minutes per vessel. The worksheet shows which side your lab is on.

  • Reuse comes out ahead when line B is high, washing is automated, breakage is low and your records show the same losses in both columns.
  • Single use comes out ahead when line D is high: hand washing, inspection and drying space.
  • Single use comes out ahead when plants leave the lab in the vessel and the vessel does not come back.

Frequently asked questions

Is it cheaper to reuse glass vessels or to buy single-use vessels?

It depends on your own numbers. Reuse spreads the purchase over many cycles and adds washing, sterilising and breakage every cycle; single use is paid every cycle and adds none of those. No published worked example with the vessel as a line was found, so fill in the worksheet for one vessel and one cycle.

How many times can I reuse an Eco2Box container?

Untreated polypropylene Eco2Box vessels and covers are autoclaved at 121 °C before first use; we recommend at most 5 uses, and the plastic never takes more than 10. The material becomes more brittle with each autoclave cycle. Gamma irradiated Eco2Box articles are supplied sterile; autoclaving them is not recommended (at most 2 to 3 cycles, and the plastic turns brittle and yellowish).

What counts as a saleable plant?

A saleable plant is a plant that is alive and fit for sale on a fixed day after planting out. Each lab sets its own standard. For the worksheet the standard itself matters less than using the same one in both columns.

Does Eco2Box publish a cost per plant?

No. Eco2Box publishes no cost figures and no prices on the site, because the cost per saleable plant depends on your wages, your crop and your losses. ECO2 nv confirms the price of an article by quote, and that price is line A of the worksheet.

Which numbers should I measure first?

Measure the minutes per vessel for washing and checking, and count the real number of uses per vessel. Those two lines are on no invoice, so they have to be measured. Then take contamination losses and survival after planting out from your records, per crop.

Fill in line K with a test on your own plants

The lines the worksheet cannot fill in for you are the losses in your own lab. A sample set of Eco2Box containers with a filter lid is available on request, so you can measure them next to the vessels you use now. Request a sample set, or ask us a question about the versions and a quote.

Related guides: How many times can a polypropylene vessel be autoclaved?, Glass or polypropylene for plant tissue culture.

Sources: Lebedev V, et al. 2018, Plants 8(1):3, doi 10.3390/plants8010003. Eco2Box reuse and sterilisation facts from ECO2 nv. No cost figures are given on this page. Checked on 20 November 2026.