Skip to content
+32 (0) 9 340 44 04 info@eco2box.com

TL;DR A new tissue culture lab should choose its vessel standard from its output, not from a catalogue. Work back from saleable plants a year to plants on the shelf, divide by plants per vessel, and add the vessels that are being washed, filled or kept as reserve. Then pick one vessel per stage that fits the plant, decide between reuse and single use, and test the shortlist on your own crop before you buy shelves around it.

The vessel standard of a new tissue culture lab is easiest to choose before anything else is bought. The shelves, the washing line and the filling routine are then built around that vessel, so a later change touches all three. Nothing was found on the open web that sizes a lab from a target output, so this guide gives the method and one worked example with made-up numbers.

Which vessels should a new tissue culture lab standardise on?

A new tissue culture lab should standardise on the smallest number of vessel sizes that covers its stages, on one footprint where the plant allows it. The standard is right when it fits the plant at each stage, fills the shelf without waste, matches the choice between reuse and single use, and has been tested on the lab’s own crop.

One standard does not mean one filter. With a filter lid, the gas exchange is set by the filter grade, and the grade can differ per stage while the vessel stays the same.

Step 1: Start the vessel standard from your output

Write down the saleable plants you want to deliver in a year, per crop, and the weeks each stage takes. Those two numbers decide how many plants stand on the shelf at any moment, and that decides the number of vessels. A vessel chosen before the output is known is a guess.

Count in saleable plants, not in plants that leave the lab. A raspberry study by Lebedev et al. names successful acclimatisation (acclimation in US usage) among the key factors that reduce the cost of micropropagated plants. Plants lost after planting out have to be produced a second time, in vessels you also need.

Step 2: Choose one vessel per stage, on one footprint

Choose the vessel per stage from the size of the plant at the end of that stage and the number of plants you want in one vessel. Then check how many vessels fit on one shelf, how they stack, and whether one person can open and close them at the speed your transfer work needs. Shape and footprint decide the shelf, so settle them before the shelves are ordered.

Stage What the vessel has to do Starting filter grade in the Eco2Box filter guide
Initiation and callus Hold a few small explants (the plant pieces you start from) and let you inspect them without opening L
General propagation Hold the number of shoots you cut per vessel, with headroom for one cycle of growth XXL
Rooting Give height for the rooted plant No starting grade; test grades side by side
Acclimatisation and hardening off Prepare the plant for normal air before planting out XXL+

A range with one cover size and several heights keeps the footprint constant. In the Eco2Box range, four round sets have a 118 mm cover: O118/50 (300 ml), O118/80 (565 ml), O118/120 (870 ml) and O118/140 (1000 ml). The guides O118/80 or OV80 and container size for blueberry and strawberry compare sizes for a crop.

Step 3: Decide between reuse and single use before you buy equipment

Decide whether vessels are reused or used once before the washing and autoclave capacity is bought, because that choice sizes both. Reuse needs room, machines and hours for emptying, washing, sterilising and checking every cycle. Single use needs storage for stock and a waste route. A new lab can still choose.

The vessel sets the limits. Untreated polypropylene Eco2Box vessels and covers are autoclaved at 121 °C before first use; we recommend at most 5 uses, and the material becomes more brittle each cycle. Gamma irradiated Eco2Box articles are supplied sterile; autoclaving them is not recommended (at most 2 to 3 cycles, and the plastic turns brittle and yellowish).

Step 4: Calculate the vessels in circulation (worked example with made-up numbers)

Vessels in circulation are the vessels on the shelf, plus the vessels in turnaround, plus a reserve. Vessels on the shelf are the plants leaving the stage per week, times the weeks in the stage, divided by the plants per vessel. Repeat the sum for every stage and add the stages up.

Line How to calculate it Example only: made-up numbers
1. Saleable plants a year Your target 520,000 plants
2. Survival after planting out From your records or a first estimate 80%
3. Plants that must leave the lab a year Line 1 divided by line 2 650,000 plants
4. Plants leaving the last stage per week Line 3 divided by 52 weeks 12,500 plants
5. Weeks in the last stage Your cycle length 4 weeks
6. Plants on the shelf at any moment Line 4 times line 5 50,000 plants
7. Plants per vessel From your own test 10 plants
8. Vessels on the shelf Line 6 divided by line 7 5,000 vessels
9. Vessels in turnaround (reuse only) Vessels started per week times the weeks a vessel spends in washing, sterilising and filling 1,250 vessels for 1 week
10. Reserve for breakage and rejects Your own share of lines 8 and 9 10%, or 625 vessels
11. Vessels in circulation for this stage Lines 8 + 9 + 10 6,875 vessels

Every input in the example is invented to keep the arithmetic easy. None of them is a recommendation for a crop or for a vessel; replace each with your own number. For single use, line 9 falls away: the lab starts 1,250 vessels a week in this example, and the stock to hold is that number times the weeks between two deliveries, plus the reserve of line 10.

Size the lab on its busiest week, not on the yearly average. A crop that is delivered in one season needs the vessels of its peak.

Step 5: Test the shortlist before you standardise

Test two or three candidate vessels on your own crop before the standard is fixed, next to each other, with the same plant material on the same shelf, for a full culture cycle. Compare condensation, contamination, plant quality, how the medium holds up and breakage. Take line 7, plants per vessel, from that test and put it back into the calculation.

Which mistakes do new labs make with a vessel standard?

  • Choosing the vessel from a catalogue before the output and the stages are written down.
  • Ordering shelves before the footprint of the vessel is fixed.
  • Counting only the vessels on the shelf and forgetting turnaround and reserve.
  • Sizing on the yearly average while the crop peaks in one season.
  • Taking over the plants per vessel of another lab without a test.
  • Fixing one filter for every stage where the stages need different gas exchange.

What do you need from a vessel supplier for a new lab?

For a new lab you need a vessel range that keeps one footprint across volumes, a choice of gas exchange per stage, a clear statement on autoclaving, and samples to test before you commit. Ask every supplier the same four things, so the answers can be compared.

Eco2Box containers are one such range. Vessel and filter cover are one set article, the filter grade is part of the article, and there are four grades with rising gas exchange: L (white), XL (yellow), XXL (red) and XXL+ (green). Not every grade exists for every set: the OV80 and the O95/60 come in all four, the TP2500 in L only. The product range lists the sets, and choosing a filter grade gives a starting grade per stage.

Frequently asked questions

How many culture vessels does a new tissue culture lab need?

Calculate it per stage: plants leaving the stage per week, times the weeks in the stage, divided by the plants per vessel. Add the vessels in washing, sterilising and filling when you reuse, and a reserve for breakage. No published rule gives a number per lab; it follows from your own output.

Should a new lab use one vessel for every stage?

One footprint for every stage keeps shelves, filling and stock simple, and it works when the plant fits. Check whether your rooted plants need a taller vessel than your explants at initiation. With Eco2Box sets the filter grade can differ per stage while the cover size stays the same, where the set exists in those grades.

Glass or plastic vessels for a new lab?

Decide first between reuse and single use, before the washing line is bought. Reuse spreads the purchase over many cycles and adds labour every cycle; single use is paid every cycle and adds none. Untreated polypropylene Eco2Box vessels are autoclaved at 121 °C before first use; we recommend at most 5 uses, and the material becomes more brittle each cycle.

How many plants go in one vessel?

That depends on the crop, the stage and the vessel, and no general figure holds. Test it: put different numbers of plants in the candidate vessel, run a full cycle and count the saleable plants after planting out. Use the result as line 7 of the calculation.

Can I test Eco2Box containers before I set the standard?

Yes. A sample set of Eco2Box containers with a filter lid is available on request. Tell ECO2 nv your crop, the stage and how many plants you plan per container, and the container size and the filter grades to compare are chosen from that.

Test before you set your vessel standard

A standard is worth fixing only after a test on your own crop. A sample set of Eco2Box containers with a filter lid is available on request. Request a sample set and tell us the crops and stages you are planning, or ask us a question about sizes and filter grades for a new lab.

Related guides: How to choose a tissue culture container: size and floor, Single use or reuse: the real cost of a culture vessel.

Sources: Lebedev V, et al. 2018, Plants 8(1):3, doi 10.3390/plants8010003. Eco2Box product facts from the ECO2 filter guide and product specifications. The worked example uses invented inputs. Checked on 20 November 2026.