Skip to content
+32 (0) 9 340 44 04 info@eco2box.com

TL;DR To reduce plant tissue culture contamination, first find its route. It reaches a vessel in three ways: microbes that arrive inside the explant, handling at the transfer step, and the closure, which is also the gap that insects such as thrips use. Clean mother plants deal with the first, aseptic technique with the second, and a lid that closes and locks with the third. A vessel can close only that third route.

Most advice on plant tissue culture contamination lists disinfectants. This guide sorts the problem by route, because each route has a different owner: the mother plant, the operator or the vessel.

Where does plant tissue culture contamination come from?

Contamination in a plant tissue culture vessel comes from three places: the explant (the piece of plant you start with), the handling during establishment and subculture, and the closure with the air and insects around it. A 1995 review by Reed and Tanprasert lists the origins of bacterial contaminants as explants, the laboratory environment, operators, small arthropods and ineffective sterilisation.

Route How it gets in What closes it Does the closure help?
Explant Microbes that live inside the plant tissue survive surface sterilisation and grow out later Clean, screened mother plants and screening of new cultures No
Handling Hands, tools, the air at the transfer area, or medium and vessels not sterilised properly Aseptic technique, training and a working laminar flow cabinet No
Closure A lid that rests on the rim leaves a gap for unfiltered air and for insects that carry spores A lid that closes onto the vessel, with gas exchange through a filter Yes

We found no published share per route for plant laboratories, so this guide gives none.

Route 1: microbes that arrive inside the explant

The explant is the route that no container closes. Endophytes are micro-organisms that live inside plant tissue. Surface sterilisation reduces what sits on the outside of the explant, but it usually does not affect microbes inside, because the disinfectant does not penetrate deeply into the tissue, as Volk and colleagues describe in a 2022 review.

These microbes can stay hidden for a long time. In the same authors’ gene bank, grape cultures looked clean at first and showed a bacterial haze near the base of the plants after about a year. In their kiwifruit cultures, bacteria showed only in older cultures, 8 to 12 weeks after the previous transfer.

A treatment in the medium does not always remove them. In a 2022 study on apple shoots, contaminated shoots grew 12 weeks on medium with a biocide and then 24 weeks without it. In two of six cultivars, all plants were still contaminated.

What works starts before the vessel: mother plants grown under cover, and screening of mother plants and of new cultures before they are multiplied (Reed and Tanprasert 1995; Cassells 2012).

Route 2: handling at the transfer step

Handling is the route that training closes. Reed and Tanprasert write that micro-organisms introduced by poor aseptic technique or improperly sterilised equipment can be corrected with better training or equipment handling, while contaminants inside the plant are harder to deal with.

An NPTEL course lecture on aseptic cultures names the practical points:

  • Autoclave the medium and the vessel before use.
  • Work in a laminar air-flow cabinet with a HEPA filter.
  • Swab the working area with 70% alcohol; dip instruments in 70% alcohol, flame them and let them cool.
  • Remove contaminated cultures from the room as soon as you see them.

Route 3: the closure, and the insects that use the gap

The closure is the one route a vessel can close. Many vessels are closed loosely on purpose. Blake (1988) describes it in one sentence:

Tissue culture vessels are usually closed with loose-fitting caps in order to allow gaseous exchange with the external environment.

According to the abstract of that paper, small arthropods such as thrips can enter through such a cap and travel from one vessel to another. They carry fungal spores and bacteria in and on their bodies, and fungal contamination is usually the first sign. A survey in the paper suggests that 50% of laboratories had experienced problems at some time, and that disinfection and strict hygiene brought them under control. The abstract does not say how many laboratories answered, and the figure dates from 1988.

A filter in the lid separates the two jobs: the lid can close, and the gas passes through the filter.

How do you tell which route your contamination took?

Read the pattern before you change anything: where the growth starts, when it shows and how it spreads point to the route. The table lists the signals that published sources describe, and marks the one row that is our own reasoning.

What you see Likely route Basis
A bacterial haze at the base of the plant, in older cultures, weeks after the last transfer Explant Volk et al. 2022
The same contaminant in explants from several collection dates, despite surface disinfection Explant Reed and Tanprasert 1995
Fungal growth as the first sign, moving from vessel to vessel Insects through the closure Blake 1988
Losses that follow one operator, one transfer session or one batch of medium Handling Our own reasoning; no study states it

Volk and colleagues advise looking at cultures at eye level, from above and from underneath, against a dark background.

What can a vessel closure change, and what can it not?

A closure changes one thing: whether unfiltered air and insects can pass between lid and vessel. It does not clean an explant and it does not correct technique. We know of no published study, for any brand, that compares contamination rates between filtered vessels and other closures, so this guide claims no percentage.

Mistakes that follow from mixing up the routes:

  • Buying new vessels for a problem that sits inside the mother plants.
  • Treating a closed lid as a promise about the culture.
  • Rooting contaminated cultures and moving them to the greenhouse. Reed and Tanprasert call this risky: microbes that are harmless in culture may become pathogenic there.

Where does the Eco2Box vessel fit?

The Eco2Box vessel addresses the closure route only. Its polypropylene cover closes hermetically onto the vessel and holds the filter. With the cover closed, gas exchange runs through the filter. The lid closes and locks; it does not rest on the rim.

The filter works by depth filtration, our design choice: gas passes through a fibrous filter and micro-organisms are held in the fibres, as in a cotton plug. It comes in four grades; see choosing a filter grade.

The vessels are clear, so you can check plantlets without opening the lid. “100% hermetically sealed” describes the closure, and says nothing about the explant or the handling. Not every article has this closure: the polystyrene RA trays with RDA covers have no filter and are not hermetic. One of our most used sets is the O118/80 with filter cover; see the full product range.

Frequently asked questions

What is the most common source of contamination in plant tissue culture?

No published figure that we found gives a share per source. Reviews name the explant, the laboratory environment, operators, small arthropods and ineffective sterilisation. An Eco2Box vessel closes one of those routes, the closure.

Can a culture vessel stop contamination?

A vessel can close one route: the gap between lid and vessel. The Eco2Box cover closes hermetically and gas exchange runs through the filter. A lid does not reach microbes inside the explant or mistakes at the transfer step.

Why does contamination appear weeks after subculture in a closed vessel?

Late growth at the base of the plant can point to microbes that came in with the tissue. A 2022 review reports kiwifruit cultures in which bacteria showed only 8 to 12 weeks after the previous transfer. An Eco2Box vessel, like any vessel, does not change that route.

How do thrips cause contamination in tissue culture?

Thrips carry fungal spores and bacteria on their bodies and, according to Blake (1988), enter through loose-fitting caps and move between vessels. The Eco2Box lid closes and locks, so it leaves no gap at the rim.

Does autoclaving the vessel remove the risk?

Autoclaving sterilises the vessel and the medium at the start, and does nothing for an explant that carries microbes or for handling afterwards. Untreated polypropylene Eco2Box vessels and covers are autoclaved at 121 °C before first use; we recommend at most 5 uses, and the material becomes more brittle each cycle.

Request a sample set or ask a question

If the closure is the route you want to test, run the test on your own shelves, next to the vessels you use now. A sample set of filtered Eco2Box containers is available on request: request a sample set. Not sure which route it is? Tell us the crop, the stage and your current closure, and ask your question.

Related guides: Thrips in tissue culture: how they enter vessels, Are Eco2Box containers sterile, and can I autoclave them?.

Sources: Reed and Tanprasert 1995, Plant Tissue Culture and Biotechnology, pages 137 to 142. Blake 1988, Acta Horticulturae 225, doi 10.17660/ActaHortic.1988.225.17. Volk et al. 2022, Applications in Plant Sciences 10, doi 10.1002/aps3.11489. Romadanova et al. 2022, Plants 11, doi 10.3390/plants11192624. Cassells 2012, doi 10.1007/978-1-61779-818-4_6. Eco2Box facts: ECO2 product sheets. Checked on 20 November 2026.